Product Details

Hydroment NATA thin set mortar adhesive are composed of select,proprietary chemicals, carefully graded aggregates and portland cement. PRODUCT USES . For installation of ceramic and porcelain tiles, marble, granite, slates, quarry tiles, sandstone, terracotta tiles and other dimensional stones. . For thin bed installation, 4mm-2mm. . Interior and Exterior installations. . Vertical and Horizontal installations. . Hydroment NATA may be mixed with BOTICA Latex for use in critical applications.
FEATURES AND BENEFITS
. Preblended ready to use, just add water,
. Freeze/Thaw resistance.
. High Strength thin bonding adhesive.

APPLICATION
Apply a thin coat of mixed hydroment NATA with the flat edge of the trowel to achieve good mechanical bonding with the substrate.
Comb motar with the appropriate size of notched trowel. For tiles with deep grooves and ridges, it may be necessary to butter the back as well so that proper adhesion and support occurs.
Re-comb mortar if any evidence of skinning or before setting occurs. Do not spread more mortar than can be covered with tiles within 10-15 minutes.
Press tiles in a twisting motion into fresh mortar bed. Promptly beat in tile to ensure maximum contact and bond. Occassionally check backs of tile to ensure at least 80% adhesives transfer for internal installations and at least 90% transfer for exterior installation.
The coverage of the adhesive is dependent on the size and type of notch and tiles used. As a guide,
3mm*3mm trowel-approx. 1.2-1.5kg/m2
6mm* 6mm trowel-approx 3.0-3.5kg/m2
10mm* 10mm trowel-approx 5.0-6.0kg/m2

DOWNLOAD DATASHEET

Product Net

Coverage